Show Entries Per Page

Showing 1 Through 10 of 18 Total Products

 

Connecticut Microwave Directional Couplers are designed to meet YOUR specific requirements. By
using standard parts we can create a custom design at "off the shelf" prices and a short delivery.
The coupled ports shown below are internally terminated. This allows not only simultaneous
measurement of Incident and Reflected power, but also independent coupling levels of each port.
Virtually all coaxial connectors are available on the Mainline or coupled ports.

 

LOW PIM!!! Customers report that Passive Inter-Modulation is -140 dB!!

CAD drawings are available for any of these Directional Couplers

 

Broadband High Frequency Bi Directional Coupler

80 - 1000 MHz  (Plot),  and 800 - 4200 (Plot), Coupling levels from 40 - 60dB. Virtually all Coaxial connectors are available on any of the main line or coupled ports.  Power is usually limited by the main line connectors rather than the internal coupling mechanism.

Flat Coupling Response

Flat Coupling Response

 

 800 - 4200 MHz ± 0.5 dB

Maximum Flexibility

Maximum Flexibility

 Connecticut Microwave Directional Couplers come with mounting holes located typically on the bottom of the Directional Coupler (Outline). However, Customer specified locations on ANY of the 6 sides is possible

.

.

 

80 - 2000 MHz ± 1.0 dB

Broadband Low Frequency BiDirectional Coupler

This Connecticut Microwave offers Broadband, Low Frequency Directional Coupler from 10 - 500 MHz (Plot),  at coupling levels ranging from 40 - 65 dB. As with all Connecticut Microwave Directional Couplers the coupled ports are independently calibrated, and internally terminated.

.

.

 

10 - 500 MHz  ± 1.0 dB

Limited Only By You Imagination

Limited Only By You Imagination

The unlimited flexibility of our designs allows designers to use their own creativity to minimize space and packaging. Shown is an EIA 1 5/8" 90 degree elbow transmission line with EIA 1 5/8" captivated swivel flanges and a type N(f) secondary armThe unlimited flexibility of our designs allows designers to use their own creativity to minimize space and packaging. Shown is an EIA 1 5/8" 90 degree elbow transmission line with EIA 1 5/8" captivated swivel flanges and a type N(f) secondary arm

High Power Tight Coupling 3, 6, & 12 dB

High Power Tight Coupling 3, 6, & 12 dB

We have created a series of high power Directional Couplers Based on the technology of our 4 KW Hybrid . Coupling levels start at 3 dB and can be customized to suit your exact needs up to 30 dB.

                                                   

          Frequency        250 - 500 MHz
                                                                            500 - 1000 MHz
                                                                          1000 - 2000 MHz

 Connectors available include EIA 1 5/8" flanges, as well as HN, DIN 7/16, SC, C. and LC

 

EIA 1 5/8" Multi probe

EIA 1 5/8" Multi probe

As demonstrated by this 9 probe EIA 1 5/8" Directional Coupler, virtually any combination of Incident or Reflected, independently calibrated probes is Possible. Although this UHF Directional Coupler is flangeless, EIA 1 5/8 fixed or swivel flanges are optional.  All EIA line sizes are available.

Special Connector Configurations... No Problem

Special Connector Configurations... No Problem

 Connectors from SMA's to EIA 6 1/8" Flanges are available. Even unique connectors such as swept connectors can be added to our devices

Previous  -  1 2  -  Next

Connecticut Microwave Corporation
1486 Highland Avenue #5, Cheshire, Connecticut 06410 USA
Phone: (203) 250-9678  -  Fax: (203) 250-9688  -  E-Mail: info@connecticutmicrowave.com